QA/QC Introduction
        1. Immerging tin: This process will directly affect the technique and the latter procedure. It needs the tin point shining, less short-circuit and missing weld.
        2. Plug board test: PC board total test. It needs the standard parameter of the test and the debugging.
        3. Debugging: The total test procedure. It needs to check all the parameter of the quality of the former procedure and debugging
        4. Aging test: The total test. It needs the entire test of the load ability, transfer time and other function of the UPS.
        5. Product test: The total test. It needs to check about the outline and functions of the UPS.

Related Sector Introduction
Quality Control Sector, Technology Sector and Manufacture Sector
        1. Establishing the Quality Control Sector, controlling the working procedures with the Technology Sector and the Manufacture Sector.
        2. The QC Sector maps out 'the Working Guideline' with the help of Technology Sector. Workers must abide the regulation and safe manipulation of 'the Working Guideline' strictly.
        3. The Manufacture Sector is in charge of organizing, carrying out and monitoring the procedure and the improvement of the product quality.
        4. The Technology Sector is in charge of guiding and monitoring the technique procedure, analyzing the technique information (data) and improving the quality continuously.
        5. The QC Sector is in charge of monitoring and checking the test, the important procedures and the quality control points, collecting and analyzing the product information (data). And make sure the product pass rate is 100%.

Q/C Flow Chart